HEF-C35RFT RFT/ECT Eddy Current Tester for Heat exchanger and Boiler tube with Tube sheet mapping
HEC-C35RFT eddy current instrument with remote field technology option is a new generation eddy current instrument. HEC-C35RFT with full-digital, multi-frequency, multi-channel is a versatile system offering a comprehensive array of electromagnetic testing techniques available on a single instrument HEC-C35RFT can be used to accurately and efficiently inspect both non-ferromagnetic and ferromagnetic tubing materials for flaws such as pitting corrosion vibrations wear steam erosion and cracking.
HEC-C35RFT combines the advanced testing capabilities of the HEC-C35RFT with a highly sensitive remote field technology option, makes the instrument an ideal solution for a broad range of tubing applications in the petroleum chemical and power generation industries. Where inspection of both non-ferromagnetic and ferromagnetic materials is required. In contrast to other ferromagnetic tubing inspection, the HEC-C35RFT provides not only a more complete --100% coverage with inner and outer surface discontinuity detection, but also thickness measurement -- in a fraction of the time.
Technical specification
| Battery | Lithium battery, 14.8V,5.7AH,long working time of 10 hours after one time charge |
| Channel | 2 channels |
| Frequency | 2 frequencies per channel with 64Hz-5MHz for ECT,5Hz-5KHz for RFT |
| Mixing Unit | mixing unit to suppress noise signal at a constant frequency |
| Tube Sheet Mapping | Tube sheet mapping draws according to real tube layout,and testing result is marked in different colors |
| Calibration | Calibration on known flaws and automatic generation of calibration curve. Calibration data can be saved and simply called up when needed |
| Probe Type | Differential, absolute,DP, encircling coil, pencil,flat,sector, array etc. |
| Screen Display | Real-time strip chart, impedance plane ,tube sheet display |
| Report | Automatic generation of report in different format |
| Alarm Output | One hardware alarm output with triode OC gate |
| Gain | 0-90 dB in o.5 dB steps |
| Phase | 0-359 in 0.1steps |
| Gain Ratio (Y/ | 0.1-10 |
| Impedance Display Mode | Point, Line, Auto |
| Filter | High pass:0-500Hz Low pass:10-10000 Hz Digital1-100 |
| Drive Voltage Level | 1-8 levels |
| Background Coordinate | Rectangular coordinate, polar coordinate |
| Power Supply | 100-240V 50/60Hz |
| Standards | ASTM,JB/T4730.6-2005,DLT 883-2004 etc. |
| Balance | Fast digital/analog electronic balance |
| Language | English |
| Operating Temperature | -20℃ to 55℃ |
| Instrument Dimensions | 290mm x 210mm x 42.5mm |
| Instrument Weight | 2.0kg |
Features And Specifications
Frequencies & Channels
●Own all of the function of HEC-C35++
●2 independently-selectable frequencies
●Frequency range from 1Hz to4MHz
●4 independently channels
●Three signal mixing capabilities
Gain Adjustment
●Adjustable gain from 0dB to 48dB in 0.5dB steps.
Phase
●360 degrees phase shift can be varied in steps of 1
degree, the impedance plane can be rotated during
modification for ease of operation.
Colored Real-Time Display
●Colored real-time display of x-y impedance plane and/or strip chart signals.
●Alarm can be set to trigger either inside or outside the gated area
Filter & Others
●Digital filters
●Fast electronic balancing
●Adjustable sample rate.
Inputs
●Four connectors are provided for differential, absolute and reflection type probes. The connectors are designed to operate with most manufacturer’s probes.
●Other connects are provided for rotating probe.
Outputs
●Eight analog outputs
●Print data to Epson series
Memory Store & Recall
●Stores test setups
●Stores screen images
Easy to learn & Easy To Operate
●All parameter settings and configurations are done from the keyboard and can be individually stored and retrieved from hard or flexible disk.
●Friendly controls are directly accessible
Independent vertical to horizontal display scaling ratio adjustable from 0.1 to 10
●A-scan and C-scan displays
●Delay erase display mode
●All instrument settings are shown on the display.
Alarm
●Audio, visual and logic output alarms
●Special alarm areas adjustable from 1 to 8
●Alarm area is provided for each display window of impedance plane
●Alarm area size and positioning are independently adjustable
Product Tags:
|
|
HEF-C35RFT RFT/ECT Eddy Current Tester for Heat Exchanger & Boiler Tube Inspection Images
|
